Licensed structural engineers · Hobart, Tasmania

Structural engineers for Hobart homes and commercial buildings

From sandstone cottages in Battery Point to steel-framed warehouses: inspections, crack reports, underpinning design, retaining walls, extensions, pools, stormwater and certificates. Independent advice, with a fixed price first.

1–2 hrsto a fixed quote
From $350+ GST, shown upfront
Tas licensedEngineer – Civil
Sandstone cottage behind a low sandstone front wall, with a clipboard and torch resting on the wall and kunanyi / Mount Wellington behind

Engineering only

We inspect, diagnose, design and certify. We never sell the repair.

Fixed quote in 1–2 business hours

Tell us about the job

Photos or plans are enough to quote. Your fixed quote says what's included, whether the job needs a site visit and when you'll receive it.

Mon–Fri 8:00am–5:00pm · No obligation · Or call 03 6146 4747

Photos or plans optional · up to 5 files · Max 50 MB each

In short

Hobart Structural Engineers is a licensed structural and civil engineering practice for homes and commercial projects across Greater Hobart, with desktop reviews Tasmania-wide. Structural inspections and crack reports start at $590 + GST, retaining wall designs at $750 + GST and Form 55 certificates at $350 + GST. Send photos or plans for a fixed quote within 1–2 business hours.

Who we work for

Homes and commercial, the same careful engineering

Residential

Homeowners, buyers & builders

Cracks, sloping floors, steep blocks, renovations and a pool in the backyard.

Residential services →

Commercial

Owners, developers & designers

Fit-outs, mezzanines, steel structures and small multi-residential, documented for your building surveyor.

Commercial services →

Services & prices

The price list

Starting fees, ex GST. You always get a fixed quote for your job before anything starts.

How it works

Three steps, no surprises

  1. Send photos or plans

    Use the form with your suburb and any deadline, such as settlement, a permit or a builder's start date.

  2. Get a fixed quote

    Within 1–2 business hours, with what's included, whether a site visit is needed and the delivery date.

  3. Signed report or design

    Ready for your buyer, builder, insurer or building surveyor, with a Form 35 or Form 55 where the work needs one.

More on how it works

Pale blue weatherboard house on timber stumps above a stepped concrete block retaining wall, with a spirit level and a tablet on the wall and the Derwent River below

Independent

An engineer with nothing to sell you

Some firms that assess foundations also sell the repair. We only inspect, diagnose, design and certify, so the advice is about your building, not a job.

If no repair is needed, our report says so. If one is, we design it and any licensed builder can build it.

Built for Hobart's ground

Why Hobart buildings crack, slide and settle

Clay soils, landslip bands, steep blocks and old masonry all change what a job needs. These are the local conditions we design for.

01

Reactive clays

Clays weathered from dolerite are documented as expansive in Hobart, with Mineral Resources Tasmania reports on houses in Lindisfarne, Lenah Valley and Taroona.

02

Landslip bands

The Landslip Hazard Code maps low, medium, medium-active and high bands. Low-risk work in a band becomes notifiable, and Rosetta and Taroona are documented landslide areas.

03

Heritage homes

Works to a place on the Tasmanian Heritage Register need Heritage Council approval, and structural changes need drawings of the existing condition.

04

Steep blocks

A retaining wall over 1.2 m, or over 0.5 m near a boundary, is no longer low-risk work. Up to 1.8 m it needs a licensed builder and an engineer's design.

FAQ

Questions we're asked most

Still unsure? Call 03 6146 4747 or send photos for a fixed quote.

How much does a structural engineer cost in Hobart?
Our fees start at $350 + GST for a Form 55 certificate, $590 + GST for a structural inspection or crack report and $750 + GST for a retaining wall design. You get a fixed quote within 1–2 business hours, before any work starts. See all prices.
Are your engineers licensed in Tasmania?
Yes. Structural engineers in Tasmania are licensed under the Occupational Licensing Act 2005 in the Engineer – Civil class, and ours hold that licence. The licence number is shown in the footer of every page.
Do you work on commercial buildings?
Yes. We design and certify fit-outs, mezzanines, new openings, steel structures, warehouses and townhouse or unit developments, and inspect commercial buildings for condition or a change of use. Commercial work is priced by fixed quote per project.
Do you carry out repairs or underpinning?
No. We are engineering only: we inspect, diagnose, design and certify, and we never sell, recommend a contractor for or carry out repairs. If a repair is needed, we design it and any licensed builder can build it.
Can you quote from photos or plans?
Yes. Photos or plans are enough for a fixed quote within 1–2 business hours, Monday to Friday, 8:00am to 5:00pm. The quote says whether the job needs a site visit and when you will receive the report or design.
Which areas do you cover?
We visit sites across Greater Hobart: Hobart, Clarence, Glenorchy, Kingborough, Brighton, Sorell, the Huon Valley and the Derwent Valley. Desktop reviews, design and certification from photos and plans are available Tasmania-wide. See areas we cover.

Ready when you are

Send a few photos. We'll send a fixed price.

Photos or plans are enough to quote. You'll have a fixed quote within 1–2 business hours, with whether the job needs a site visit and when you'll receive it.

Mon–Fri 8:00am–5:00pm · Prices from $350 + GST · Engineering only, independent advice

Call Get a fixed quote